Gas volume changes with temperature and pressure. Mass flow measurement avoids that problem.
A MEMS thermal mass flow meter heats a tiny element in the gas stream and measures how much heat the flowing gas carries away. More flow takes more heat. The result is a direct reading of mass flow, usually shown in SLPM, which is litres per minute at standard conditions.
Because the reading reflects the mass of gas, the result does not drift with changes in gas temperature or pressure the way a volumetric reading can. That keeps mixing ratios and process settings consistent.
A meter measures and reports flow. A controller adds a control valve and holds a setpoint. Some units include a manual precision valve so flow can be set by hand while the meter shows the true mass flow.
Thermal mass flow meters are intended for dry, clean gases. Moisture, oil or particles can foul the sensing element.
Standard litres per minute: the flow converted to standard reference conditions of temperature and pressure.
Each is calibrated for specific gases. Tell us all the gases you need when ordering.
Tell us your application and we will recommend an instrument.
Related searches: MEMS thermal mass flow meter, gas mass flow controller, how thermal mass flow meters work, SLPM mass flow meter, gas mixing flow control.